This product is out of stock but due to arrive around Dec 30. Please preorder if you like to ensure getting one. They have been very popular lately.
This new motor is really amazing. Perfect for that micro Bugatti project you have been wanting to do.
Impressive micro counter-rotating motor system.
An interesting way to improve any scale models flying characteristics. (no prop torque created you mount this one straight)
Factory Specs
Kv: 2000rpm/v
Recommended Lipo: 2S 7.4V
Suggested prop: 5030 3 Blade (INCLUDED 1x EP-5030R and 1x EP-5030)
Idle Max current: 0.2A per motor
Burst current (5sec): 3A per motor
Weight: 13.8g (including mount and wire)
Weight: 18.5g with 2 props
Prop hole: 3/5mm
Dimensions : 24 x 13mm
Test data:
5030 prop (Recommended)
Voltage: 7V
Current: 2.2A per motor
Max Thrust: 180g (info supplied from factory)
Our Tested thrust was 155g at 8V with 4.6A ( 2.3A per motor) on a TrueRC 7.4V 350mAh pack (aprox. 36W) with programmed VOLO 7A ESC's
NOTES:
This motor(s) requires 2 brushless ESC, it will not work with only on ESC. The ESC's should be same brand same model.
The motor wires in picture look like only 1 wire, in fact there are 3 wires per motor as it should be, they are very thin and are already pre-tinned for your convenience.
For motor mounting use servo screws.
