A smaller and lighter version of our popular micro brushless control!
The versatile Phoenix-10 can be used in aircraft or helicopter applications
and is ideal for Astro 010, Hacker B-20, Mini 1615, and CD-ROM motor applications.
As an aircraft ESC, the Phoenix-10 is superbly suited for micro flyers.
With several cut-off choices to choose from, this little beauty has cut-off
settings for 2, 3, and 4 cell Lithium Ion and Lithium Polymer packs, yet it
works just as well with NiCad and NiMH cells. An optional brake, over-current
protection, and a host of other features make this the sensorless to own!
Piccolo and Hornet helicopter owners couldn't believe this little gem when it
was introduced. Disabled brake, low cut-off voltage, fixed end points and rotor
governor in one unit at an unbeatable price make the Phoenix-10 the choice of
micro heli flyers everywhere. With it's unparalleled feature set, the Phoenix-10
is an excellent ESC for both beginners and expert flyers. It's features allow a
single investment to grow with your flying needs.
Castle Creations PHX-10 Phoenix-10 10A Brushless ESC
■Battery Eliminator Circuit (BEC): eliminates receiver battery
■Safe "Power On"
■Tough surface mount construction
■Audible Arming Signal
■Auto Motor cut-off with reset
■Low torque "Soft Start": protects gear boxes and belt drives from shock
■Smooth reverse exponential throttle
■Self-calibrating endpoints: maximizes usable stick travel
■Auto shut-down when signal is lost
■Simple setup: no complicated switches or wiring
■Part # PHX-10
■Volts w/BEC: 12.6 max
■Volts NO BEC: 25.2 max
■Lipo Cells w/BEC: 3S max
■Lipo Cells NO BEC: 4S max
■NiCad or NiMh Cells w/BEC: 10 max
■NiCad or NiMh Cells NO BEC: 16 max
■Continuous: 10 amps
■Switching Rate: 12,500 hz
■Resistance: 0.013 ohms
■Reversible: Yes - change any two wires
■Low Voltage Cut-off: Programmable
■Size: 0.73 x0.8 x.16"
■Weight (w/wires): 0.21 oz (6g)
■Connector Type: Universal