Economy price, high performance controller. Plug and Play or program to your needs. This controller will Auto count # of Li-po cells and set proper cut off or you can program in exact Voltage you want with program card.
· Input voltage: 5.5V-17V (support 2-4 lithium batteries)
· Continue current: 18A
· Burst current: 23A (within 10 seconds)
· BEC output: 2A/5V (linear)
· Size( length X width X high): 45x24x6 mm
· Weight: 18 g
Configure parameter with optional program card
1). Off Voltage (Low Voltage Protection Threshold): user can set custom voltage threshold according to cell
quantity in range of 00.0-49.9V, default is 00.0V.
Note: System will calculate battery cells and set proper threshold automatically if this setting is 00.0V,
Protection voltage for each Li-XX cell is 2.85V.
2)．BrakeType: Off, Soft, Hard. default is Off (brake disabled). Soft brake: less forceful and
brake time is longer. Hard brake: more forceful and brake time is shorter .If Soft brake or Hard brake
is selected, When the Motor is stop and the throttle is closed, brake will be continued. Soft brake and
hard brake are designed for glider, especially suitable for folding propeller glider.
3)．AdvanceT (Timing Mode): Low, Middle and High, default is Middle. Low advance timing is recommended for
high inductance and low KV motors. High advance timing is recommended for low inductance and high KV
motors, e.g. high KV inrunner motors. For some high KV motors, if it cogs while rotating at high
speed, the “High” timing mode is recommended.
4)．Start: Fast, Soft and Very Soft. Default is Fast. Fast is preferred for fixed-wing aircraft. Soft and
Very Soft both are 4 seconds very soft start. The speed of propeller rotation rises in slow-speed during
the 4 seconds. The rotation speed is little faster in Soft and is slower in Very Soft. Soft and Very Soft
are suitable for helicopters. When setting Soft or Very Soft mode, if the throttle is closed then the motor
stopped and the throttle opened again within 4 seconds, start will be Fast mode. But if beyond 4 seconds,
start will be 4 seconds Soft mode or Very Soft mode again.
5)．Off Type (Cutoff Mode,Low Voltage Protection Mode): Reduce power and Cutoff output power for selecting,
default is Reduce the output power gradually to 50% of the current power.
6)．Curve (Throttle Curve Mode): Curve1, Curve2 and Curve3. Default is Curve1.
7)．St Percent (Start power) : to set the Percent of output power when motor start in range of 00% - 39%,
default is 00%. Under default setting, output power is decided automatically by system according to throttle
8)．Reverse Motor Rotation: Normal and Reverse. default is Normal.