TWO-METER is a simple to use electronic measuring device that is controlled by high performance microprocessor and precise resistors. It has three functions of ‘watt-meter’, ‘battery Voltage checker’ and self-balancer. Those functions are essential for electric flyers and drivers to ensure safe battery condition and to measure the electric consumptions of the power system. The built-in self-balancer can equalize the individual cells quickly. All the functions of a Lipomate with the added bonus of a 100A watt/amp meter.
Specification |
Input Power | max. 60V |
Max. current (Watt-meter) | 100A |
Min. operating voltage | 7.2V |
Power consumption (Battery checker) | approx. 20mA |
Battery checker | 2~6S LiXX |
Weight | 120g |
Dimension | 110x60x23 mm |
TWO-METER can handle all types of Lithium batteries (LiPo, LiIo, LiFe) consisting of series-wired cells, but the battery pack has to have a balance plug for checking voltages.
- Watt-meter program
The Watt-meter circuit can measure the electric current up to 100A. You can verify the electric consumptions on your power system.
- Battery Voltage checker
TWO-METER can show you the voltage and residual capacity of your Lithium battery pack with its individual voltage of each cell.
- Integrated self-balancer
TWO-METER has an integrated self-balancing circuit which is self-operative without linking to charger. When you connect the battery pack to the individual port of the device the balancing job will be started instantly. In this case the individual cell voltages will be equalized to the lowest cell voltage of the battery pack.
Standard Accessories:
Factory now includes EAC124 board for the balancer. But you can choose a board of your choice below.
EAC124 Connection board for Align/Eflite/Parkzone-type (2S~6S)
Optional Accessories:
EAC120 8-pin cable for self-made connection
EAC123 Connection board for PolyQuest-type (2S~6S)
EAC128 Connection board for Kokam/Graupner/Robbe-type (2S~6S)
EAC129 Connection board for ThunderPower/MPX/FlightPower-type (2S~6S)
